Ta izdelek ni več na voljo.
V razdelku predhodnik/naslednik preverite novo generacijo izdelka ali se obrnite na lokalnega zastopnika podjetja Endress + Hauser.
for mechanical tank gauges
LT and LTC series.
-
Naslednik
-
Standardni produkti
- Zanesljivi, robustni, nezahtevni za vzdrževanje
Tehnična odličnost
Preprostost
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
FLEX izbira Tehnična odličnost Preprostost - F
- L
- E
- X
Segment Fundamental
Zadostite svojim osnovnim merilnim potrebam
Tehnična odličnost Preprostost - F
- L
- E
- X
Segment Lean
Obvladajte ključne procese na preprost način
Tehnična odličnost Preprostost - F
- L
- E
- X
Segment Extended
Optimirajte procese z inovativnimi tehnologijami
Tehnična odličnost Preprostost - F
- L
- E
- X
Segment Xpert
Imejte pod nadzorom najzahtevnejše aplikacije
Tehnična odličnost Preprostost Spremenljivo
-
-
-
Tehnične informacije (TI)
Analog Transmitter AT500 - Technical Information
AT500 analog transmitter is used in combination with the
LT11/12/14/16 float tank gauge.
When the float tank gauge indicator reaches the alarm setting point,
AT500 transmitter outputs an alarm contact signal by operating a micro
switch.
AT500 is a limit contact unit that has six contacts for controlling the
level
of the tank contents.
The flame proof enclosure allows installation in hazardous areas, such
as in the petrochemical industry.EN SL 03/06/201301/12/2010Jezik:
angleščina
Verzija:
03/06/2013
Velikost datoteke:
676.8 KB
Ime datoteke:
TI00032G08EN14.13.pdf
-
-
-
Tehnične informacije (TI)
AT5000-Technical Information
Tank Gauging
Jezik:
angleščina
Verzija:
01/10/2006
Velikost datoteke:
103.3 KB
Ime datoteke:
TI032N08en10.06.pdf
-
-
-
Navodila za uporabo (BA)
Analog Transmitter AT5000 AT500 - Operating Instructions
AT500 analog transmitter is used in combination with LT11/12/14/16 float
tank gauge.
When the level gauge indicator reaches alarmsetting point, AT500
transmitter outputs an alarm contact signal by operating a micro switch.
AT500 is a limit contact unit that has six contacts for controlling the
level
of the tank contentsEN SL 03/06/201301/12/2010Jezik:
angleščina
Verzija:
03/06/2013
Velikost datoteke:
1.3 MB
Ime datoteke:
BA01012G08EN14.13.pdf
-