button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Flowfit CPA25 - Flow assembly with splash protection cap

Flow assembly
Flowfit CPA25

Universal assembly for the water and wastewater industry and industrial auxiliary processes.

CPA25
Nalaganje cene
Cene trenutno niso na voljo
Price on request
Filtriraj po Merjenje /uporaba
Filtriraj po Merjenje /uporaba
Merjenje/uporaba

Za prenos CAD risb tega izdelka, ga konfigurirajte

Close Show results

  • Merilni princip

    Potentiometric

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Merilni princip

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Merilni princip

    Conductive

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Merilni princip

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .