Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Cleanfit CPA472 assembly is designed for installation in tanks or pipelines where space is limited.

Cleanfit P CPA472

CPA472
Nalaganje cene
Cene trenutno niso na voljo
Price on request
from CHF ??.-

  • Merilni princip

    Amperometric oxygen measurement

  • Application

    Water, waste water, process

  • Characteristic

    - Retractable holder- Open and closed tank, piping (min DN80)

  • Design

    - manual or pneumatic, can be fully automated with CPC30 / 300.- integrated rinse chamber with connectionG1/4" or NPT1/4"

  • Material

    Holder : PP, PEEK, PVDFSealing : different material available.

  • Dimension

    Immersion depth : 66 - 215mm
    (2.57inch - 8.38inch)

  • Process temperature

    max. 60 or 80°C
    (140°F or 176°F)

  • Process pressure

    max. 4 or 6bar
    ( 58psi or 140°F)

  • Connection

    Thread G1,25"external; thread NPT1"external; flange DN50/ASME2", dairy fitting DN50.

  • Merilni princip

    Sensor ORP / Redox

  • Application

    Water, waste water, process

  • Installation

    Retractable holder

  • Characteristic

    Open and closed tank, piping (min DN80)

  • Design

    - manual or pneumatic, can be fully automated with CPC30 / 310.- integrated rinse chamber with connectionG1/4" or NPT1/4"

  • Material

    Holder : PP, PEEK, PVDFSealing : different material available.

  • Dimension

    Immersion depth : 66 - 215mm
    (2.57inch - 8.38inch)

  • Process temperature

    max. 60 or 80°C
    (140°F or 176°F)

  • Process pressure

    max. 4 or 6bar
    ( 58psi or 140°F)

  • Connection

    Thread G1,25"external; thread NPT1"external; flange DN50/ASME2", dairy fitting DN50.

  • Merilni princip

    Potentiometric

  • Application

    Water, waste water, process

  • Installation

    Retractable holder

  • Characteristic

    Open and closed tank, piping (min DN80)

  • Design

    - manual or pneumatic, can be fully automated with CPC30 / 310 - integrated rinse chamber with connection G1/4" or NPT1/4"

  • Material

    Holder: PP, PEEK, PVDF sealing : different material available.

  • Dimension

    Immersion depth: 66 - 215 mm
    (2.57 inch - 8.38 inch)

  • Process temperature

    max. 60 or 80°C
    (140°F or 176°F)

  • Process pressure

    max. 4 or 6 bar
    (58 psi or 140°F)

  • Connection

    Thread G1, 25" external; thread NPT1 "external; flange DN50/ASME2", dairy fitting DN50.

Za shranjevanje podatkov na vaši napravi uporabljamo piškotke, da bi lahko prilagodili in izboljšali uporabniško izkušnjo. Podrobnosti o piškotih najdete v pravilniku o varstvu osebnih podatkov.