Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina

HAW562
Surge arrester

HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser
HAW562 surge arrester ©Endress+Hauser

Surge arrester for DIN rail according to IEC 60715

The HAW562 surge arrester is used to protect electronic components from being destroyed by overvoltage. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines (fieldbuses) and in power lines are safely passed into the ground. The functionality of the transmitter or the electronics component to be protected is not affected.

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo

please wait Loading alternative products

Hitra izbira

Izberite med predlaganimi možnostmi
Sales price
  • <%label%>
  • <%feature%>
  • Process Connection
  • <%message%>

ali

Individualna konfiguracija

Nadaljujte z izbiranjem med vsemi možnostmi
  • Prednosti

    • Investment intensive measuring instruments protected

    • Increased plant availability as surge arrester is perfectly matched to the electronic components involved in process automation and process measuring technology

    • Application in Ex areas - optionally...

  • Področje uporabe

    Surge arresters are used to weaken residual currents from upstream lightning protection steps and to limit system-induced or -generated overvoltage surges.

    HAW562 units are primarily used in process automation and in measuring and communication...

Lastnosti in specifikacije

Nazaj

Podrobnosti

  • Merilni princip

    Surge arrester

  • Measuring principle

    Surge arrester for DIN rail mounting

  • Function

    Surge arresters are applied to protect electronic components of a plant against overvoltage! Due to this investment intensive measuring instruments are protected and the plant availability is increased.

  • Application

    Surge protection for power supply or signal / communication cables

  • SIL

    2

  • Certificates

    ATEX

    IECEx

    CSA

  • Merilni princip

    Surge arrester

  • Function

    Surge arrester for DIN rail mounting

    Compact device for an easy ordering (no separation of mounting module and protection module)

    Flexible integration into the measuring chains of the process industry due to approvals according to ATEX & IEC, SIL2 conformity

    compatibility with the established fieldbusses (HART, FF, PA)

    Innovative grounding concept to avoid low-frequency equalizing currents – direct and indirect shield grounding possible in one device

    Uninterruptible operation of the plant due to an automatic resetting after the discharge process

  • Certification

    SIL2 conformity


    CSA

  • Dimensions (wxhxd)

    HAW562-AAA, HAW562-AAD, HAW562-AAE, HAW562-8DA:

    12 x 90 x 72.5 mm

    (0.47" x 3.54" x 2.85")


    HAW562-AAB, HAW562-AAC:

    18 x 90 x 73 mm

    (0.71" x 3.54" x 2.87")

  • Operating Voltage

    24V/60V/230V/5V/12(80)V/24V

Dokumenti / Priročniki / Softver

Pribor / Nadomestni deli

Št.
Kataloška koda
Specifikacija