Sanitary digital thermometer iTHERM TM411

Hygienic temperature measurement instrument for optimum product quality, process safety and efficiency

TM411

Primerjava

Prikaži vse: Temperatura Uporovna tipala temperature (RTD)

iTHERM TM411, a hygienic thermometer with QuickSens and StrongSens technology — The iTHERM TM411 sanitary modular thermometer with digital display delivers highly accurate, reliable and fast temperature measurements in sterile applications

An iTHERM TM411 sanitary thermometer being installed in a bioreactor — Sanitary thermometer iTHERM TM411 in a bioreactor

The high accuracy iTHERM iTM411 temperature sensor with digital display — Modular iTHERM TM411 temperature assembly in hygienic design with international approvals for use in hazardous areas

Sanitary thermometer iTHERM TM411 with digital display — iTHERM TM411 sanitary thermometers are available with a digital display for on-site process temperature monitoring

Lastnosti na dlani

Accuracy

class A acc. to IEC 60751
class AA acc. to IEC 60751
Response time

depending on configuration
QuickSens: t90 = 1,5 s
StrongSens: t90 = 9,5 s
Max. process pressure (static)

at 20 °C: 40 bar (580 psi)
Operating temperature range

PT100:
-200 °C … 600 °C
(-328 °F … 1.112 °F)
StrongSens:
-50 °C … 500 °C
(-58 °F … 932 °F)
QuickSens:
-50 °C … 200 °C
(-58 °F … 392 °F)

Vse specifikacije

Področje uporabe

The modular sanitary thermometer iTHERM TM411 with digital display delivers highly accurate, reliable and fast temperature measurements in process lines, vessels, tanks, fermenters and more. The high-performance device is designed for the strictly regulated food and life sciences industries. Configure your hygienic instruments from a selection of thin film RTDs with QuickSens or StrongSens technology or 2x Pt100 wire wound temperature sensors, smart transmitters and hygienic process connections.

Designed for use in hygienic and aseptic applications in food, beverage and life sciences
Measuring range: –200 to 600 °C (-28 to 1 112 °F)
Pressure range up to 40 bar (580 psi)
Protection class: up to IP69K
Remote parametrization with secure Bluetooth® temperature transmitters
International approvals: Certified for use in hazardous areas, explosion protection as per ATEX/IECEx, CSA, FM, EAC Ex, JPN Ex, NEPSI; Hygiene standards according to 3-A, EHEDG, ASME BPE, FDA, TSE Certificate of Suitability

Prednosti

Optimum process control: Fast sensor response times with iTHERM QuickSens technology (t90: 1.5 s)
Up to 75% faster and safer recalibrations with iTHERM QuickNeck – tool-free quick-release for instant insert removal
High sensor availability under rough conditions: Vibration resistant RTD technology iTHERM StrongSens (> 60g)
Easy product selection, configuration and maintenance
Increase productivity and product safety in sanitary applications with highly accurate and reliable measurements
Thermowells, hygienic process connections and housings expertly manufactured from high-grade materials treated for low surface roughness

Videoposnetki

Improve sterile, aseptic manufacturing with accurate and reliable process temperature measurement: Our iTHERM TM4xx series of hygienic design modular thermometers

Innovative temperature sensor - iTHERM QuickSens

Innovative temperature measurement - the temperature sensor with unbeatably short response times for high-precision measurements and accurate process control. Vibration-resistant up to 60g.
- Več informacij
Innovative temperature measurement - iTHERM StrongSens

Innovative temperature measurement - the robust temperature sensor for highly precise measurements and accurate process control. Vibration resistance of up to 60g.
- Več informacij
iTHERM QuickNeck - Taking the right turn

The temperature measuring insert can be removed with a simple twist of the QuickNeck process connection, saving time and effort during maintenance or recalibration.
- iTHERM TM411 with QuickNeck technology

Segment Extended

Vrhunski produkti
Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

Kaj je FLEX?

Enostavni produkti
Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

Kaj je FLEX?

Standardni produkti
Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

Kaj je FLEX?

Vrhunski produkti
Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

Kaj je FLEX?

Specialni produkti
Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

Kaj je FLEX?

FLEX izbira	Tehnična odličnost	Preprostost
F L E X Segment Fundamental Zadostite svojim osnovnim merilnim potrebam	Tehnična odličnost	Preprostost
F L E X Segment Lean Obvladajte ključne procese na preprost način	Tehnična odličnost	Preprostost
F L E X Segment Extended Optimirajte procese z inovativnimi tehnologijami	Tehnična odličnost	Preprostost
F L E X Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije	Tehnična odličnost	Preprostost Spremenljivo

Spoznajte FLEX podrobneje

Loading alternative products

Predhodnik

TST74
TST72

Zgodbe o uspehu

Medical autoclaves

New sensor technology automates recalibrations to reduce risk in batch sterilization. Learn More!
Preberi celotno zgodbo
Automated inline self-calibration at Lonza

Automated inline self-calibration at Lonza for full monitoring throughout bioprocess
Preberi celotno zgodbo
Speed and accuracy help to meet stringent quality demands

Chr. Hansen eased temperature monitoring and calibration, both critical to the UHT treatment of the nutrient solution, using iTHERM TM411 temperature sensor
Preberi celotno zgodbo

Sanitary digital thermometer iTHERM TM411

Hygienic temperature measurement instrument for optimum product quality, process safety and efficiency

Lastnosti na dlani

Accuracy

Response time

Max. process pressure (static)

Operating temperature range

Področje uporabe

Prednosti

Videoposnetki

Innovative temperature sensor - iTHERM QuickSens

Innovative temperature measurement - iTHERM StrongSens

iTHERM QuickNeck - Taking the right turn

Segment Extended

Predhodnik

Zgodbe o uspehu

Medical autoclaves

Automated inline self-calibration at Lonza

Speed and accuracy help to meet stringent quality demands

Merilni princip

Characteristic / Application

Thermowell / protection tube

Insert / probe

Outer diameter protection tube / Insert

Material protection tube/ thermowell

Process connection

Tip shape

Surface roughness Ra

Operating temperature range

Max. process pressure (static)

Accuracy

Response time

Integration head transmitter

Ex - approvals

Certification

Fixing kit cpl.TMT8x/7x (european)

Spare parts kit sealing TA30A/TA30D

Spare parts kit sealing TA30R

Spare parts kit sealing QuickNeck

Spare parts kit copper ring G3/8",(10 p)

Spare parts kit ring D21/di 10xgreen,10p

Spare parts kit gasket Da21/10x2EPDM 10p

Spare parts kit gasket Da14.5/ Di8.5x2

Compression fitting M24x1.5, d6 cpl.

Spare Part Kit Press-Screw TK40 G1/4 d6

Spare Part Kit Press-Screw TK40 G1/2 d6

O-ring 14.9x2.7 VMQ, FDA, 5 pcs.

O-ring set for ingold connection

O-ring 21.89x2.62 VMQ, FDA, 5 pcs.

O-ring 28.17x3.53 VMQ, FDA, 5 pcs.

Profile gasket 29x36x3.7, FDA, 5 pcs.

Spare Parts Kit Cover TA30R

Plug 2x 7/8" PA, NPT1/2, 316, IP67. NEMA6, -40...+105oC;

Plug 2x 7/8" FF, NPT1/2, 316, IP67, NEMA6, -40...+105oC;

Plug 2x M12 PA, NPT1/2, 316, IP67, NEMA6, -40...+105oC;

Plug 7/8" PA, M20, 316, IP67, NEMA6, -40...+105oC

Plug 7/8" FF, M20, 316, IP67, NEMA6, -40...+105oC

Plug M12 PA, M20, 316, IP67, NEMA6, -40...+105oC

Plug M12 8-pole M20, 316L, IP67, -30...+90oC;

Terminal Head TA30A

Terminal Head TA30R

Terminal Head TA30S

Compression Fitting TK40

Spare Parts Kit Sealing TK40

Extension Neck TE411

iTHERM Insert TS111

iTHERM TT411 Thermowell

iTEMP TMT180, Head Transmitter Pt100

iTEMP TMT181, Head Transmitter PCP

iTEMP TMT71, Transmitter 4-20mA

iTEMP TMT72, Transmitter HART

iTEMP TMT84, Transmitter PA

iTEMP TMT85, Transmitter FF

Display Unit Head Transmitter

iTEMP TMT182, Head Transmitter HART

iTEMP TMT82, Transmitter HART

Commubox FXA195

Readwin 2000 Operation + Read. software

iTHERM TM411

plug screw fitting G1/2 1.4435

RMA42
Process transmitter with control unit

RN221N
Active barrier with optional HART® diagnosis

RIA15
Loop-powered indicator for 4 to 20 mA or HART signals

EngyCal RH33
BTU meter

RB223
Loop powered passive barrier