Title
button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
product picture of the particle measuring device FWE200DH

FWE200DH
particle measuring device

Reliable dust measurement in wet gases

IDFW200
Nalaganje cene
Cene trenutno niso na voljo
Price on request
product picture of the particle measuring device FWE200DH
  • F
  • L
  • E
  • X
©Endress+Hauser
PROFIBUS Logo

Lastnosti na dlani

  • Measuring principle

    Scattered light forward

  • Measured variables

    Scattered light intensity, dust concentration (after gravimetric comparison measurement)

  • Process temperature

    PVDF gas removal probe: ≤ +120 °C
    Steel and Hastelloy gas removal probe: ≤ +220 °C
    Versions for higher temperatures on request

  • Certified measuring range

    Dust concentration: 0 ... 7.5 mg/m³ / 0 ... 10 mg/m³ / 0 ... 15 mg/m³ / 0 ... 50 mg/m³ / 0 ... 100 mg/m³ / 0 ... 200 mg/m³ / 0 ... 500 mg/m³

Področje uporabe

The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet gases. The gas is extracted via a gas sampling probe and heated above the dew point. Droplets in the gas vaporize, making it impossible for them to falsify the measurement results. The very sensitive scattered light measurement principle enables accurate measurements even at low dust concentrations. The FWE200DH meets the requirements of EN 14181 and EN 15267.

  • Monitoring of wet gas scrubbing facilities

  • Meassurement in very wet exhaust air and in technological processes

  • Measurement in wet gas downstream of desulfurization plants


Device properties:

  • For very low to medium dust concentrations

  • Gas sampling and return combined in one probe

  • Contamination check

  • Automatic monitoring of zero and reference point

  • Integrated system diagnostics for early detection of maintenance requirements

Prednosti

  • Reliable and proven dust measurement in wet gases

  • Economic operation due to very few consumable parts and very low installation effort

  • Very low maintenance since no moving parts come into contact with the aggressive gas

  • Very long service life due to intelligent design

Videoposnetki

  • FWE200DH: Reliable dust measurement in wet gases

  • PROFIBUS Logo
    PROFIBUS

    PROFIBUS is a fieldbus communication standard used to connect field devices and control systems across industrial plants.

Segment Xpert

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo
Loading alternative products

Zgodbe o uspehu

Morda vas zanima tudi

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .