Lastnosti na dlani
-
Process temperature
max. 50°C
(max. 122°F) -
Process pressure
max. 6bar
(max.87psi)
Področje uporabe
Flowfit COA250 is a flow assembly for wall mounting or unsupported installation in pipes and is the ideal solution wherever sensor immersion is either impossible or undesirable. Its design speeds up sensor response and allows easy accessibility to the sensor for calibration in the air. Insensitive to clogging, it provides automatic self-venting ensuring reliable measured values at all times. Better still, with the automatic cleaning nozzle, you'll benefit from extended maintenance intervals.
Flowfit COA250 is a flow assembly for oxygen sensors with a diameter of 40mm in:
Wastewater treatment plants:
- Process water treatment and monitoring
- Effluent water monitoringDrinking and process water:
- Process water treatment and monitoring
- Water quality monitoring in rivers, lakes or seasUtilities of all industries:
- Process water treatment and monitoring
- Cooling water monitoring
Prednosti
Flexible mounting options: Suitable for wall mounting or unsupported pipe installation.
Fast measuring values: Low assembly volume shortens sensor response times.
Easy and safe maintenance: Automatic sensor cleaning without process interrupt.
Optimized sensor accessibility: Easy sensor removal for calibration in the air.
Fast availability: Automatic de-aeration thanks to bottom inlet/top outlet design.
Robust design: Suitable for process pressures up to 6 bar (87 psi).
Zgodbe o uspehu
-
Standardni produkti
- Zanesljivi, robustni, nezahtevni za vzdrževanje
Tehnična odličnost
Preprostost
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
| FLEX izbira | Tehnična odličnost | Preprostost |
|---|---|---|
Segment Fundamental Zadostite svojim osnovnim merilnim potrebam |
Tehnična odličnost
|
Preprostost
|
Segment Lean Obvladajte ključne procese na preprost način |
Tehnična odličnost
|
Preprostost
|
Segment Extended Optimirajte procese z inovativnimi tehnologijami |
Tehnična odličnost
|
Preprostost
|
Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije |
Tehnična odličnost
|
Preprostost
Spremenljivo |
-
-
Tehnične informacije (TI)
Flow Assembly for O2 Measurement FlowFit W COA 250
Assembly for unsupported installation in pipes or wall mounting
EN SL 01/03/200701/10/200101/09/1997Jezik:
angleščina
Verzija:
01/03/2007
Velikost datoteke:
443.4 KB
Ime datoteke:
TI111CEN.PDF
-
-
-
Navodila za uporabo (BA)
Operating instructions COA250
Flow assembly for oxygen sensors
EN SL 28/02/200731/12/2003Jezik:
angleščina
Verzija:
28/02/2007
Velikost datoteke:
532.9 KB
Ime datoteke:
BA111CEN.pdf
-
-
-
Izjava proizvajalca
Product family: FlowFit W
Product root: COA250-
Declaration number: HE_01033_01.18
Manufacturer specification: RoHSEN SL 04/09/2018Jezik:
angleščina
Verzija:
04/09/2018
Velikost datoteke:
88.8 KB
Ime datoteke:
HE_01033_01.18.pdf
-