Optical analysis offerings

Categories

TDLAS and QF analyzers Raman spectroscopic systems Emission monitoring solutions Particle measuring devices Digital analyzer solutions Process gas analyzers Air quality measuring devices Smoke detectors Visual range measuring devices Overheight detectors

product picture of the process gas analyzer ENERSIC600

Enostavni produkti
Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

Kaj je FLEX?

Standardni produkti
Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

Kaj je FLEX?

Vrhunski produkti
Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

Kaj je FLEX?

Specialni produkti
Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

Kaj je FLEX?

FLEX izbira	Tehnična odličnost	Preprostost
F L E X Segment Fundamental Zadostite svojim osnovnim merilnim potrebam	Tehnična odličnost	Preprostost
F L E X Segment Lean Obvladajte ključne procese na preprost način	Tehnična odličnost	Preprostost
F L E X Segment Extended Optimirajte procese z inovativnimi tehnologijami	Tehnična odličnost	Preprostost
F L E X Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije	Tehnična odličnost	Preprostost Spremenljivo

Spoznajte FLEX podrobneje

New

Primerjaj

ENERSIC600 process gas analyzer

Gas chromatograph for reliable custody transfer gas analysis – energy management included

Measured variables Gas components, calorific value, density, Wobbe index, molar mass, compressibility

Measuring medium Natural gas, biogas, air, H2, O2, N2

Analysis time ≥45 seconds

product picture of the emission monitoring solution GM32

New

Primerjaj

GM32 emission monitoring solution

Measure aggressive gases directly and quickly – even in ATEX zones

Measured variables NO, NO2, NH3, SO2

Process temperature ≤ +550 °C

Ambient temperature range –20 °C ... +55 °C
Temperature change maximum ±10 °C/h

Hazardous area approvals IECEx: Ex pzc op is [ia] IIC T3 Gc
ATEX: II 3G Ex pzc op is [ia] IIC T3 Gc

JT33 TDLAS analyzer featuring closed enclosure with window

Primerjaj

JT33 TDLAS gas analyzer

Reliable H₂S measurement for increased quality, process control, and asset integrity

Measuring principle TDLAS

Analyte and measurement ranges H2S (Hydrogen sulfide):
0 to 10 ppmv
0 to 500 ppmv
other ranges by request

Hazardous area approvals ATEX / IECEx /UKEx Zone 1
PESO / KTL / JPNEx Zone 1
INMETRO Zone 1
CNEx Zone 1
CSA Class I, Division 1
CSA Class I, Zone 1

Product Picture Raman Rxn2 analyzer view from front showing left side

Primerjaj

Raman Rxn2 analyzer

Bridge your application from the laboratory to the process environment

Laser wavelength Starter: 785 nm
Base Model: 532 nm, 785 nm, 1000 nm
Hybrid: 785 nm

Spectral coverage Starter 785 nm: 300-3300 cm-1
Base model 532 nm: 100-4350* cm-1
Base model 785 nm: 100-3425* cm-1
Base model 1000 nm: 200-2400 cm-1
Hybrid 785 nm: 150-1890** cm-1
*Low signal-to-noise ratio at <150 cm-1
**Low signal-to-noise ratio at <175 cm-1

product picture of the emission monitoring solution Combiprobe CP100

New

Primerjaj

Combiprobe CP100 particle measuring device

Combined measurement of dust, volume flow, pressure, and temperature

Measured variables Dust concentration (after gravimetric comparison measurement), gas velocity, gas pressure, gas temperature

Process temperature –20 °C ... +200 °C

Process pressure –70 hPa ... 10 hPa

product picture of the digital analyzer solution Monitoring Box

New

Primerjaj

Monitoring Box digital analyzer solution

Analytical processing of status and application data

Supported products FLOWSIC200, GM32, MCS100FT, MCS200HW, MCS300P, MERCEM300Z, VICOTEC320, VICOTEC450, VISIC100SF, VISIC50SF, DUSTHUNTER SB100, DUSTHUNTER SP100, FLOWSIC100, MARSIC300, VICOTEC410, GMS800 (DEFOR + OXOR)

Data output Monitoring Box frontend
Alerts in the dashboard
Notifications via email
Data export (CSV)
Data integration into foreign systems (API)

Hosting Off-premise: https://monitoringbox.endress.com
Industrial PC, other solutions on request

Contract type SaaS (Software as a Service)

product picture of the particle measuring device DUSTHUNTER SP30

New

Primerjaj

DUSTHUNTER SP30 particle measuring device

Measure intelligently. Reduce costs.

Process temperature -40 °C ... +220 °C

Measuring range Scattered light intensity: 0 ... 7.5 mg/m3 / 0 ... 3,000 mg/m3
Measuring ranges freely selectable; nine measuring ranges pre-configured (0 ... 7.5/15/45/75/150/225/375/1,000/3,000 mg/m3)

Conformities TÜV type test
Suitability tested acc. DIN EN 15267-1 (2009), DIN-EN 15267-2 (2009), DIN EN 15859 (2010), DIN EN 14181 (2014)
Certified for use as Dust monitor and Leak monitor for filter control downstream of dust collectors at installations requiring approval (13th BlmSchV, 17th BlmSchV, 27th BlmSchV, 30th BlmSchV, 44th BlmSchV and TA Luft)

product picture of the emission monitoring solution MARSIC300

New

Primerjaj

MARSIC300 emission monitoring solution

Safely on the right course

Measured variables CO2, SO2, NO, NO2, CO, NH3, H2O, CH4

Ambient temperature range 0 °C ... +50 °C
Type approved up to 45 °C

Conformities MARPOL Annex VI and NTC 2008 – MEPC.177(58)
Guidelines for exhaust gas cleaning systems – MEPC.340(77)
Guidelines for SCR reduction systems – MEPC.198(62)
DNV Rules for Type Approvals (2012)
IACS E10 and Rules of major classification societies

product picture of the gas analyzer MCS200HW

New

Primerjaj

MCS200HW emission monitoring solution

Proven measurement technology for flue gas monitoring

Measured variables CH4, CO, CO2, Corg, HCl, H2O, NH3, NO, NO2, N2O, O2, SO2

Ambient temperature range +5 °C ... +50 °C

Process temperature ≤ +550 °C

product picture of the process gas analyzer MCS300P

New

Primerjaj

MCS300P process gas analyzer

Simultaneous process monitoring of up to 6 measuring components

Measuring range More than 60 measuring components available (depending on concentration and sample gas composition)
Up to 6 components simultanously
2 measuring ranges per component
Automatic measuring range switching (adjaustable)
2 limit values per component
Measuring ranges depend on application and combination of measuring components

Do you need help selecting your optical analysis system?

We support you in selecting and configuring best-fit products for your measuring tasks and applications.

About optical analysis for solids, liquids, slurries, particles, and gases

Endress+Hauser has made significant investments in our customers’ futures by offering a comprehensive portfolio of atomic and molecular analysis tools for laboratory, process, and emissions monitoring. Our world-leading optical analysis systems help customers optimize key industrial processes and more reliably monitor product quality and emission in real time. Key extractive and in-situ technologies include tunable diode laser absorption spectroscopy (TDLAS), quenched fluorescence (QF), Raman spectroscopy, NIR, IR, UV/Vis, and atomic absorption.

Benefits

Process transparency: Data from optical analysis provides transparency in processes, allowing for better decision-making
Real-time measurement: Measurements in seconds or minutes enable users to minimize downtime and control operational costs in industrial processes
Quality and reliability: Optical analysis systems help customers optimize key industrial processes and reliably monitor product quality
Non-invasive, hands-free measurement: Inline optical analysis enables safe, efficient, and non-destructive measurement without sample prep or handling
High plant availability: High plant availability is achieved through the installation of easy-to-operate and maintain optical systems
Compliance: To minimize emissions in a targeted manner, it is necessary to reliably analyze and monitor gas concentrations

Frequently asked questions

What is optical analysis?

Optical analysis studies how light interacts with matter to identify and quantify chemical compositions. It involves examining the behavior of electromagnetic radiation—particularly in the ultraviolet, visible, and infrared regions of the spectrum—as it is absorbed, emitted, scattered, or transmitted by materials. This type of optical analysis is fundamental in fields such as spectroscopy, imaging, and microscopy, where understanding the properties of light and its interaction with matter reveals critical information about molecular structure, composition, and dynamics. To fully grasp how optical analysis works, it is important to understand the nature of electromagnetic radiation and how it interacts with matter.

What is electromagnetic radiation?

The electromagnetic spectrum represents the full range of all frequencies or wavelengths of electromagnetic radiation. Electromagnetic radiation is classified by wavelength into radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays. Electromagnetic radiation can be expressed in terms of energy, wavelength, or frequency. The behavior of electromagnetic radiation depends on its wavelength. Electromagnetic radiation has both wave and particle properties. A charge at rest produces an electric field and a moving charge generates both electric and magnetic fields. Accelerated charges emit electromagnetic radiation.

How does electromagnetic radiation interact with matter?

The interaction of electromagnetic radiation with matter can involve absorption, emission, or scattering of radiation. The magnitude of interaction between electromagnetic radiation and matter depends on the size of the molecular dipole moment. Different regions of the light spectrum are used to understand various molecular or atomic properties.

What is spectroscopy?

Spectroscopy is the study of the interaction of electromagnetic radiation with matter involving absorption, emission, or scattering of radiation. It has been an essential tool for understanding atomic or molecular composition and structure.

What are spectroscopy techniques and/or measuring methods for chemical analysis?

Since 2012, Endress+Hauser has invested in technologies for inline or laboratory optical analysis, gas monitoring, and laboratory automation, including the acquisitions of SpectraSensors, Kaiser Optical Systems, Analytik Jena, and Blue Ocean Nova AG, as well as a strategic partnership with SICK AG. Within this expanded analysis portfolio, we offer a full range of spectroscopy tools. We use spectroscopy, an optical analysis technique, to understand atomic or molecular composition because of its specificity, ease-of-use, and ability to provide insight into a product or process. Spectroscopic techniques in chemical analysis use light to probe the composition, structure, or concentration of substances. Spectroscopy techniques provided by Endress+Hauser include:

Raman spectroscopy – Detects molecular vibrations by analyzing scattered laser light, useful for identifying chemical bonds and structures.
Tunable diode laser absorption spectroscopy (TDLAS) – Uses laser light tuned to specific wavelengths to measure gas concentrations with high sensitivity.
Quenched fluorescence (QF) – Measures light emitted by excited molecules; quenched fluorescence tracks changes in luminescence intensity and decay to detect analytes like oxygen.
UV-Vis-NIR spectrophotometry – Measures reflectance, absorbance, and transmittance across ultraviolet, visible, and near-infrared wavelengths.
Infrared (IR) spectroscopy – Analyzes absorption of IR light to identify functional groups and molecular structures.
Atomic emission and absorption spectroscopy – Measures light emitted or absorbed by atoms to determine elemental composition.

These optical analysis techniques rely on the interaction of electromagnetic radiation with matter, making them powerful tools for both qualitative and quantitative chemical analysis.

What is Raman spectroscopy?

Raman spectroscopy is a powerful molecular spectroscopy technique that analyzes the vibrational modes of compounds and provides molecular fingerprint identification of materials through spectral analysis. It typically uses visible or near-infrared laser light as the source of electromagnetic radiation. The method measures the inelastic scattering of photons, known as Raman scattering, which occurs when light interacts with molecular vibrations. Unlike absorption-based techniques, Raman spectroscopy is based on scattering of light and does not require a defined path length. It is sensitive to changes in the polarizability of the electron cloud during light interaction, making it ideal for measuring symmetric bond vibrations. Like other molecular spectroscopy techniques, Raman spectroscopy is used to identify chemical composition and molecular structure. However, it offers important advantages, including its high specificity and ability to measure in aqueous samples. An aspect of Raman spectroscopy that is advantageous in a process setting is its ability to scale a quantitative analytical model from R&D to manufacturing with minimal scale-specific data.

What is ultraviolet-visible spectroscopy (UV/Vis)?

UV/Vis is an analytical technique that measures the absorption of ultraviolet and visible light by a substance. It operates within the wavelength range of approximately 200–800 nm and is commonly used to determine concentration, chemical structure, and purity of samples. UV/Vis analysis is widely applied in pharmaceuticals, environmental testing, and chemical research for fast, reliable results.

What is near infrared (NIR)?

Near-infrared (NIR) refers to the region of the electromagnetic spectrum with wavelengths ranging from approximately 780 nm to 2500 nm. NIR spectroscopy is widely used in optical analysis to identify chemical compositions, monitor material properties, and perform non-destructive testing. It is especially valuable in industries like hydrocarbon processing, pharmaceuticals, agriculture, and food processing for rapid, accurate analysis without sample preparation.

What is absorption spectroscopy?

Absorption spectroscopy measures the absorption of specific wavelengths of electromagnetic radiation by atoms or molecules in a sample. Absorption occurs due to the selective removal of certain frequencies by matter, revealing valuable information about the sample’s composition and concentration.

What is tunable diode laser absorption spectroscopy (TDLAS)?

TDLAS is a form of infrared spectroscopy that analyzes absorption related to changes in dipole moments of molecules during vibrational transitions. It uses infrared or near-infrared laser light tuned to a gas’s unique absorption lines to measure the concentration of specific analytes with high precision. The technique is governed by the Beer-Lambert Law, which relate the amount of light absorbed to the properties of the absorbing material. By applying Beer-Lambert Law, TDLAS quantifies how much light is absorbed at specific wavelengths, enabling accurate measurement of trace gases.

What is quenched fluorescence (QF)?

Quenched fluorescence (QF), also known as fluorescence quenching, is an optical technique that measures how the fluorescence of a molecule is reduced or "quenched” by oxygen. Fluorescence refers to the luminescence of light by an excited molecule almost immediately after it absorbs light. This method typically uses ultraviolet (UV) or visible light as the source of electromagnetic radiation. The technique involves the excitation and emission of light by fluorescent molecules, and the degree of quenching provides valuable information about the presence or concentration of specific analytes, such as oxygen.

Sorodna vsebina

Novice, dogodki in drugo ...

Quality & Compliance

Do you need help selecting your optical analysis system?

About optical analysis for solids, liquids, slurries, particles, and gases

Benefits

Frequently asked questions

Sorodna vsebina

Raman spectroscopy - advanced optical analysis technology

For reliable H₂S measurement: JT33 TDLAS gas analyzer

Tunable diode laser absorption spectroscopy (TDLAS)

My Endress+Hauser

Produkti in Storitve

Panoge

Podpora

Podjetje

Optical analysis

Do you need help selecting your optical analysis system?

About optical analysis for solids, liquids, slurries, particles, and gases

Benefits

Frequently asked questions

Sorodna vsebina

Raman spectroscopy - advanced optical analysis technology

For reliable H2S measurement: JT33 TDLAS gas analyzer

Tunable diode laser absorption spectroscopy (TDLAS)

Produkti in Storitve

Panoge

Podpora

Podjetje

Cenimo vašo zasebnost

For reliable H₂S measurement: JT33 TDLAS gas analyzer