button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
product picture of the ultrasonic flow measurement instrument FLOWSIC100

FLOWSIC100
ultrasonic flow measurement instrument

Volume flow measuring devices for continuous emission monitoring

IFL100
Nalaganje cene
Cene trenutno niso na voljo
Price on request
product picture of the ultrasonic flow measurement instrument FLOWSIC100
  • F
  • L
  • E
  • X
©Endress+Hauser

Lastnosti na dlani

  • Measured variables

    Volumetric flow a. c., volumetric flow s. c., gas velocity, sound velocity, gas temperature

  • Measuring range

    Gas Velocity: 0 ... ± 40 m/s

Področje uporabe

FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust.

  • Emission monitoring in the chemical and hydrocarbon processing (HPI) industry

  • Emission measurement in the processing industry (cement, iron and steel, glass)


Device properties:

  • Rugged titanium converters for long service life

  • Corrosion-resistant material for use with aggressive gases (option)

  • Integrated measurement via duct diameter for types H, M, and S

  • Probe version PR for cost-saving, single-sided installation in duct

  • Automated operational check with zero and reference point test

Prednosti

  • Reliable flow measurement for ducts with small up to very large diameters

  • No purge air required for applications with gas temperatures up to 260 °C

  • Minimum operating and maintenance costs

  • Accurate measuring results under difficult measuring conditions

  • Measurement without pressure loss, therefore no influences on the process

  • User-friendly operation via SOPAS ET software

  • Reliable function monitoring due to enhanced diagnosis

Loading alternative products

Zgodbe o uspehu

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo

Morda vas zanima tudi

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .