button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
product picture of the ultrasonic flow measurement instrument FLOWSIC300

FLOWSIC300
ultrasonic flow measurement instrument

Non-custody transfer measurement and process monitoring

IFL300
Nalaganje cene
Cene trenutno niso na voljo
Price on request
product picture of the ultrasonic flow measurement instrument FLOWSIC300
  • F
  • L
  • E
  • X
©Endress+Hauser

Lastnosti na dlani

  • Measured variables

    Volumetric flow a. c., volume a. c., gas velocity, sound velocity

  • Measuring range

    Gas velocity 0.3 ... 60 m/s
    Depending on the nominal size of the pipe

Področje uporabe

The FLOWSIC300 ultrasonic flowmeter features a unique combination of high quality components, large measuring range, simple installation, and low installation costs. It can be used anywhere where custody approval is not required: For internal measurements in the natural gas grid and with process measurements in the petrochemical industry. FLOWSIC300 incorporates proven technology and components of the rugged custody transfer quality gas flowmeters for custody transfer.

  • Gas flow measurement in non custody transfer applications

  • Control measurements in the field of natural gas transfer and storage

  • Internal measurements for balancing purposes


Device properties:

  • Modular flexible installation

  • Non-contact ultrasonic technology without pressure loss

  • Measuring range span greater than 100 : 1

  • Sensors can be replaced under pressure

  • Low sensitivity to pulsation and pressure regulator noise

  • Remote electronics (max. 15 m)

  • Bi-directional measurement with automated diagnostics

Prednosti

  • Simple installation into existing pipelines

  • Efficient solution, especially for pipe diameters over 12 inches, thanks to installation onto existing pipelines and without need for a meter body

  • Reduced acquisition costs – the sensor extraction tool can be used for multiple devices

  • Low maintenance, wear and no deterioration

  • Low operating costs thanks to automated diagnostics and condition-based maintenance

  • Suitable for installation in underground compartments via remote electronics and sensors with enclosure rating IP 68

Segment Extended

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

FLEX: Extended ©Endress+Hauser

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo
Loading alternative products

Zgodbe o uspehu

  • Tough conditions: Installation at the difficult-to-access measuring point Tough conditions: Installation at the difficult-to-access measuring point

    Reliable flow measurement despite difficult conditions

    Schluchseewerk AG wanted to record and optimize the efficiency of its turbines at the pumped storage plant in Wehr. Endress+Hauser offers the optimum solution with its ultrasonic clamp-on flowmeter.

  • GPsol Wellchecker on a pumpjack GPsol Wellchecker on a pumpjack

    Real-time analysis of mature oil wells

    GPsol, together with Endress+Hauser, developed a system that individually measures each component of extraction wells and provides as much information as possible about the current flow.

  • Picture of customers Wintershall in front of hydrocarbon calibration rig at Endress+Hauser Flow Picture of customers Wintershall in front of hydrocarbon calibration rig at Endress+Hauser Flow

    Reliable calibration using hydrocarbons

    On the new factory calibration rig from Endress+Hauser, Wintershall Dea can now calibrate Promass F with hydrocarbons as legally mandated – a significantly cheaper option than on-site calibration.

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .