Področje uporabe
Flowfit COA30 is an efficient tool for calibrating your oxygen sensors. It ensures precise results and can be flexibly adapted to different measurement requirements. Thanks to its compact design, it is quickly ready for use anywhere, supporting reliable operations.
Flowfit COA30 is used wherever precise and efficient calibration of oxygen sensors is required.
The PMMA version of Flowfit COA30 is suitable for liquids and enables manual oxygen measurements directly at the process – even without an installed measuring point. Where measuring points exist, calibration with Flowfit COA30 is easier since the sensor need not be removed. Flowfit COA30 is used in various applications, such as:
Power & Energy:
- Water and steam cycles
Life Sciences:
- Fermentation processes
Food & Beverage:
- Preparation
- Filling
- Storage
Chemical:
- Inertization
Prednosti
Precise calibration of your oxygen sensors with test gases: Flowfit COA30 enables precise calibration of your oxygen sensors, perfectly tailored to the requirements of the respective measuring point.
Easy calibration of oxygen sensors with different sensor lengths from 120 mm to 420 mm: Install the sensor in the flow cell, connect it to the transmitter, attach the appropriate test gas, calibrate – done.
With Flowfit COA30, you save significant time during zero-point calibration and avoid additional cleaning. Calibration is performed using test gases such as nitrogen – completely residue-free and effortless.
Flexible oxygen measurement directly at the process – even without a fixed measuring point (only with the PMMA version)
Maximum efficiency: calibration of the measuring point in the process without removing the installed sensor (only with the PMMA version)
Zgodbe o uspehu
.jpg "Memosens technology cuts maintenance, improves system reliability in chilled water system")
-
Standardni produkti
- Zanesljivi, robustni, nezahtevni za vzdrževanje
Tehnična odličnost
Preprostost
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
| FLEX izbira | Tehnična odličnost | Preprostost |
|---|---|---|
Segment Fundamental Zadostite svojim osnovnim merilnim potrebam |
Tehnična odličnost
|
Preprostost
|
Segment Lean Obvladajte ključne procese na preprost način |
Tehnična odličnost
|
Preprostost
|
Segment Extended Optimirajte procese z inovativnimi tehnologijami |
Tehnična odličnost
|
Preprostost
|
Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije |
Tehnična odličnost
|
Preprostost
Spremenljivo |
-
-
Tehnične informacije (TI)
TI Flowfit COA30
Flow cell for calibrating oxygen sensors with a length of 120 to 360 mm and a diameter of 12 mm
EN SL 23/05/2025Jezik:
angleščina
Verzija:
23/05/2025
Velikost datoteke:
1 MB
Ime datoteke:
TI01824CEN_0125-00.pdf
-
-
-
Tehnične informacije (TI)
TI Flowfit COA30
Flow cell for calibrating oxygen sensors with a length of 120 to 420 mm and a diameter of 12 mm
EN SL 09/01/2026Jezik:
angleščina
Verzija:
09/01/2026
Velikost datoteke:
1.2 MB
Ime datoteke:
TI01876CEN_0125-00.pdf
-
-
-
Navodila za uporabo (BA)
BA Flowfit COA30
Pretočna celica za kalibriranje senzorjev kisika dolžine 120 do 360 mm in premera 12 mm
EN SL 23/05/2025Jezik:
slovenščina
Verzija:
23/05/2025
Velikost datoteke:
1.7 MB
Ime datoteke:
BA02485CSL_0125-00.pdf
-
-
-
Navodila za uporabo (BA)
BA Flowfit COA30
Pretočna celica za kalibriranje senzorjev kisika dolžine 120 do 420 mm in premera 12 mm
EN SL 14/01/202604/12/2025Jezik:
slovenščina
Verzija:
14/01/2026
Velikost datoteke:
1.9 MB
Ime datoteke:
BA02583CSL_0226-00.pdf
-
-
-
Navodila za vgradnjo (EA)
EA Flowfit COA30
For the maintenance of the COA30 assembly
EN SL 05/06/2025Jezik:
angleščina
Verzija:
05/06/2025
Velikost datoteke:
589.7 KB
Ime datoteke:
EA01607CEN_0125-00.pdf
-
-
-
Navodila za vgradnjo (EA)
EA Flowfit COA30
For replacing the seal of the COA30
EN SL 06/06/2025Jezik:
angleščina
Verzija:
06/06/2025
Velikost datoteke:
721.8 KB
Ime datoteke:
EA01608CEN_0125-00.pdf
-
-
-
Izjava proizvajalca
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02055_01.25
Manufacturer specification: PEDEN SL 22/04/2025Jezik:
angleščina
Verzija:
22/04/2025
Velikost datoteke:
264.6 KB
Ime datoteke:
HE_02055_01.25 COA30_11_DGRL_.pdf
-
-
-
Izjava proizvajalca
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02066_01.25
Manufacturer specification: PEDEN SL 22/04/2025Jezik:
angleščina
Verzija:
22/04/2025
Velikost datoteke:
265.5 KB
Ime datoteke:
HE_02066_01.25 COA30_12_DGRL_.pdf
-
-
-
Izjava proizvajalca
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02166_01.25
Manufacturer specification: RoHSJezik:
nemščina
Verzija:
23/06/2025
Velikost datoteke:
262.6 KB
Ime datoteke:
HE_02166_01.25_COA30.pdf
-
-
-
List o komponentah
CS for Flowfit COA30
Components Sheet for COA30-*CA* Hose Connection
Jezik:
angleščina
Verzija:
12/09/2025
Velikost datoteke:
183.3 KB
Ime datoteke:
Components_Sheet_71685366_COA30-CA_Hose_Connection_COA30.pdf
-
Pogosto kupljeno skupaj
Dodatna oprema
