The Commubox FXA195 modem connects HART logged, intrinsically safe measuring devices to the USB interface of a Windows system.
This makes the remote operation of the transmitters possible with the aid of the Endress+Hauser FieldCare software. Power is supplied to the Commubox by means of the USB interface.
Prednosti
Remote commissioning of field devices directly from the control room or anywhere in the current loop
Full support for FieldCare software
For connection to intrinsically safe circuits (4...20 mA)
Reactionless in accordance with IEC 61508 for connection to 4...20 mA SIL 2 loops
Switchable communication resistor
Adapter cable for the FXA195 USB/HART Modem supplied (4mm/2mm)
Setting up and monitoring equipment at an ammonia plant presents significant challenges. Engie Energía uses advanced technological solutions, like remote communication devices in hazardous areas.
Connects intrinsically safe Smart transmitters with HART protocol to the USB port of a personal computer or laptop. This makes the remote operation of the transmitters possible with FieldCare.
Input
USB signal as per USB specification.
Output
Connects HART field devices with the USB interface of a laptop
Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.
Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .
.jpg "Automatic dosing system for the water quantity of a reverse osmosis system")
