button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Flowfit CPA240 - Flow assembly for high temperatures and pressures

Flow assembly
Flowfit CPA240

Durable assembly for the chemical, petrochemical, and power industries

CPA240
Nalaganje cene
Cene trenutno niso na voljo
Price on request
from CHF ??.-
Filtriraj po Merjenje /uporaba
Filtriraj po Merjenje /uporaba
Merjenje/uporaba

Za prenos CAD risb tega izdelka, ga konfigurirajte

Close Show results

  • Merilni princip

    Potentiometric

  • Application

    Drinking water treatment plants, boiler feedwater and ultra-pure water plants, cooling-water circuits, fertiliser production, sugar production, gas scrubbers, petrochemical plants

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass

  • Design

    3 electrode installation locations, 120mm electrodes, flow direction horizontal or from the bottom, thread connection G1/2" for spray cleaning

  • Material

    Flow vessel: PVDF or stainless steel 1.4404
    O-rings: EPDM, Viton, Chemraz or Fluoraz

  • Process temperature

    PVDF version: 0 to 120 °C (32 to 248 °F)
    Stainless steel version: -15 to 150 °C (5 to 302 °F)
    With EPDM: -15 to 140 °C (5 to 284 °F)

  • Process pressure

    PVDF version: max. 8 bar at 50 °C (max. 116 psi at 122 °F)
    Stainless steel version: max. 10 bar (max. 145 psi)

  • Connection

    Pressurized flange DN25/PN16, ASME 1" lbs 150, JIS 10K25A

  • Additional certifications

    Material certification 3.1.B EN 10204

  • Merilni princip

    Sensor ORP / Redox

  • Application

    Drinking water treatment plants, boiler feedwater and ultra-pure water plants, cooling-water circuits, fertiliser production, sugar production, gas scrubbers, petrochemical plants

  • Installation

    Flow through holder

  • Characteristic

    Piping, bypass

  • Design

    3 electrode installation locations, 120mm electrodes, flow direction horizontal or from the bottom, thread connection G1/2" for spray cleaning

  • Material

    Flow vessel: PVDF or stainless steel 1.4404
    O-rings: EPDM, Viton, Chemraz or Fluoraz

  • Process temperature

    PVDF version: 0 to 120 °C (32 to 248 °F)
    Stainless steel version: -15 to 150 °C (5 to 302 °F)
    With EPDM: -15 to 140 °C (5 to 284 °F)

  • Process pressure

    PVDF version: max. 8 bar at 50 °C (max. 116 psi at 122 °F)
    Stainless steel version: max. 10 bar (max. 145 psi)

  • Connection

    Pressurized flange DN25/PN16, ASME 1" lbs 150, JIS 10K25A

  • Additional certifications

    Material certification 3.1.B EN 10204

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .