button cancel
Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Turbimax CUS51D is a smart suspended solids sensor for unattended operation in water and wastewater.

Suspended solids sensor
Turbimax CUS51D

Memosens sensor for suspended solids and turbidity measurement in water, wastewater and utilities

CUS51D
Nalaganje cene
Cene trenutno niso na voljo
Price on request
from CHF ??.-
Filtriraj po Merjenje /uporaba
Filtriraj po Merjenje /uporaba
Merjenje/uporaba

Za prenos CAD risb tega izdelka, ga konfigurirajte

Close Show results

  • Merilni princip

    Four beam alternating light

  • Application

    Wastewater, process water and primary water treatment applications.
    Turbidity and suspended solids measurement at all stages of the wastewater treatment process and at primary water treatment applications with medium to high turbidities.

  • Installation

    Insitu (immersion in process or retractable holder), extractive with sample and flow cell

  • Design

    40 mm sensor, stainless steel

  • Dimension

    194 mm x 40 mm

  • Material

    Stainless steel 316L

  • Measurement range

    For formazin: 0 to 4000 FNU
    Display range up to 9999 FNU
    For sludge: 0 to 300 g/L
    The achievable measuring range depends very much on the media

  • Connection

    G1, NPT3/4"

  • Ingress protection

    IP68 (1 m / 3.3 ft) water column with 1N KCl during 60 days

  • Merilni princip

    Four beam alternating light

  • Application

    Wastewater, process water and primary water treatment applications.
    Turbidity and suspended solids measurement at all stages of the wastewater treatment process and at primary water treatment applications with medium to high turbidities.

  • Installation

    Insitu (immersion in process or retractable holder), extractive with sample and flow cell

  • Measurement range

    For formazin: 0 to 4000 FNU
    Display range up to 9999 FNU
    For sludge: 0 to 300 g/L
    The achievable measuring range depends very much on the media

  • Measuring principle

    Scattered light in 90°/135° and 4beam cross light

  • Design

    40 mm sensor, stainless steel

  • Material

    Stainless steel 316L

  • Dimension

    194 mm x 40 mm

  • Process temperature

    Process temperature:
    -5 to 50 °C (23 to 122 °F)
    Ambient temperature:
    -20 to 60 °C (-4 to 140 °F)

  • Connection

    G1, NPT3/4"

  • Ingress protection

    IP68 (1 m / 3.3 ft) water column with 1N KCl during 60 days

Primerjava izdelkov

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .