Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina

RN221N
Active barrier with optional HART® diagnosis

Active barrier RN221N ©Endress+Hauser
Active barrier RN221N ©Endress+Hauser

Active barrier with power supply for safe separation of 4...20 mA current circuits

The active barrier RN221N supplies e.g. a transmitter with power, if required also in the Ex-area, and then transmits the galvanically isolated signal. With the optionally available HART® monitoring the status of the transmitter is monitored. If an error arises a relay at the RN221N sends an alarm. The relay has to be actively set back. Thus even just briefly occurring errors can be easily located.

Hitra izbira

Izberite med predlaganimi možnostmi
  • <%label%>
  • <%feature%>
  • Process Connection
  • <%message%>

ali

Individualna konfiguracija

Nadaljujte z izbiranjem med vsemi možnostmi
  • Prednosti

    • Wide range power supply, flexible power source

    • Compact side by side DIN rail housing

    • International Ex approvals; marine approval

    • Bidirectional HART® transmission. Communication sockets for HART® sensor setting up. Evaluation of status information from...

  • Področje uporabe

    • Galvanic isolation of 4 to 20 mA current circuits

    • Removing large loop circuits

    • Powering 2 wire transmitters

    • Monitoring of SMART transmitters with early-warning system

    • Intrinsically safe sensor supply for Ex-area

Podrobnosti

  • Merilni princip

    Power supply

  • Function

    Active barrier with power supply for safe seperation of 4...20 mA current circuit

  • Certification

    ATEX II(1)GD(Ex ia)IIC

    FM USA IS

    FM USA NI

    CSA IS

    CSA NI

    IECEx Ex ia

    TIIS Ex ia

    GOST Ex i

    Marine approval

    SIL

    Hygenic WHG

  • Input

    1 x analog 4...20 mA

  • Output

    1 x analog 4...20 mA

  • Relay output

    1 x no contact

  • Auxiliary power supply / Loop power supply

    20...250 V DC/AC

  • Dimensions (wxhxd)

    22.5 x 110 x 112 mm

    (0.89" x 4.33" x 4.41")

  • Operation

    HART

  • Merilni princip

    Active barrier

  • Measuring principle

    Power supply

  • Function

    Active barrier with power supply for safe seperation of 4...20 mA current circuit

  • Loop power supply

    20...250 V DC/AC

  • Power Supply

    Not defined

  • Auxiliary power supply / Loop power supply

    20...250 V DC/AC

  • Input

    1 x analog 4...20 mA

  • Output

    1 x analog 4...20 mA

  • Software functions

    Not defined

  • Certificates

    ATEX II(1)GD(Ex ia)IIC

    FM USA IS

    FM USA NI

    CSA IS

    CSA NI

    IECEx Ex ia

    GOST Ex i

    Marine approval

    SIL

    Hygienic WHG

  • SIL

    Not defined

  • Operation

    HART

Dokumenti / Priročniki / Softver

Pribor / Nadomestni deli

Št.
Kataloška koda
Specifikacija
  • Predhodnik