Poskusite iskati po ključnih besedah, šifri izdelka ali številki naročila ali serijski številki, npr. „CM442“ ali „tehnične informacije“
Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina
Picture of thermal mass flowmeter Proline t-mass 65I insertion for industrial gases & compressed air

Proline t-mass 65I
thermal mass flowmeter

Robust flowmeter with adaptation to changing process conditions

65I
Please Wait (spinning wheel)
Nalaganje cene
Cene trenutno niso na voljo
Price on request
from CHF ??.-

Lastnosti na dlani

  • Max. measurement error

    Gas: 1.5% o.r. (10 to 100% o.f.s.), 0.15% o.f.s. (1 to 10% o.f.s.)

  • Measuring range

    20 to 720000 kg/h (44 to 1587328 lb/h)

  • Medium temperature range

    -40 °C to +130 °C (-40 °F to +266 °F)

  • Max. process pressure

    -0.5 to 20 bar gauge (-7.25 to 290 psi gauge)

  • Wetted materials

    Transducer: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022)
    Insertion tube: 1.4404 (316/316L); Alloy C22, 2.4602 (on request)
    Transducer guard: 1.4404 (316L)
    Compression fitting: 1.4404 (316/316L)
    Ferrules: PEEK 450G, PVDF
    Bonded seals: EPDM, Kalrez 6375, Nitrile and 316/316L

Področje uporabe

The t-mass 65I was designed for the direct mass flow measurement of industrial gases and compressed air. With a turndown of typically 100:1 it can measure accurately operational flow rates and off line leakage. The integrated gas engine allows the customer to configure the device for 20 freely selectable gases. The t-mass 65I insertion version is suitable for large pipelines or rectangular ventilation ducts.

  • Measuring principle is characterized by a high operable flow range and direct mass flow measurement

  • Measurement of gases and gas mixtures in circular piping or rectangular ducts.

Device properties

  • Insertion version for nominal diameter DN 80 to 1500 (3 to 60")

  • Medium temperature up to +130 °C (266 °F)

  • High accuracy: ±1.5 % o.r. (10 to 100 % o.f.s.)

  • Device as compact or remote version

  • 4-20 mA HART, PROFIBUS PA/DP, Modbus RS485, FF

  • Worldwide approvals (Hazardous areas)

Prednosti

  • Measurement of gases and gas mixtures in circular piping or rectangular ducts

  • Plant safety – high accuracy and repeatability for a wide range of utility and process gases

  • Cost-effective measurement – easy installation, negligible pressure loss and maintenance-free

  • Reliable flow trending – multivariable measurement

  • Fast and efficient commissioning – guided operating menus

  • High plant availability – self-diagnostics and error monitoring

  • Automatic recovery of data for servicing

Videoposnetki

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo