Za začetek iskanja vnesite vsaj dva znaka.
  • Zgodovina

Analog total chlorine sensor
CCS120

Analog total chlorine sensor 
CCS120 ©Endress+Hauser

Disinfection sensor for all water and wastewater applications

CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.

  • Enostavni produkti

  • Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

  • Standardni produkti

  • Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

  • Vrhunski produkti

  • Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

  • Specialni produkti

  • Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

FLEX izbira Tehnična odličnost Preprostost
  • F
  • L
  • E
  • X

Segment Fundamental

Zadostite svojim osnovnim merilnim potrebam

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Lean

Obvladajte ključne procese na preprost način

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Extended

Optimirajte procese z inovativnimi tehnologijami

Tehnična odličnost
Preprostost
  • F
  • L
  • E
  • X

Segment Xpert

Imejte pod nadzorom najzahtevnejše aplikacije

Tehnična odličnost
Preprostost

Spremenljivo

  • Lastnosti na dlani

    • Measurement range

      0,1 - 10ppm total chlorine; pH 6,5 - 9,5

    • Process temperature

      5°C - 45°C

    • Process pressure

      0bar - 3bar

Hitra izbira

Izberite med predlaganimi možnostmi
  • <%label%>
  • <%feature%>
  • Process Connection
  • <%message%>

ali

Individualna konfiguracija

Nadaljujte z izbiranjem med vsemi možnostmi
  • Prednosti

    • Recalibration intervals approx. 1 to 3 months under constant operating conditions

    • Easy membrane replacement thanks to prefabricated membrane cap

    • Measured values are not affected by conductivity fluctuation

    • Measurement virtually independent of flow rate in...

  • Področje uporabe

    CCS120 measures total chlorine in:

    • Drinking and process water
      - Process and distribution networks
      - Monitoring, control and optimization of disinfection processes

    • Wastewater treatment plants
      - Disinfection monitoring and control in wastewater outlet
      -...

Lastnosti in specifikacije

Nazaj

Podrobnosti

  • Merilni princip

    Total chlorine

  • Application

    Potable water,Process water, Waste water, pools

  • Characteristic

    Amperometric measurement of total chlorine.

  • Measurement range

    0,1 - 10ppm total chlorine; pH 6,5 - 9,5

  • Measuring principle

    - Total chlorine consists of free chlorine (HOCl, OCl) and bounded chlorine (chloramines).
    - A constant polarisation voltage between working and counter electrode instigates the electrochemical reaction.
    - Only slightly pH dependent.

  • Design

    Closed amperometric two electrode sensor for continuous measurement of total chlorine.

  • Material

    Sensor shaft : PVC
    Membrane cap : PPE

  • Dimension

    Diameter : appr. 25mm
    Length : 210mm

  • Process temperature

    5°C - 45°C

  • Process pressure

    0bar - 3bar

  • Temperature sensor

    Including NTC-temperature sensor.

  • Connection

    TOP68 plug-in head

Dokumenti / Priročniki / Softver

Pribor / Nadomestni deli

Št.
Kataloška koda
Specifikacija
    • Kataloška koda 71412917

      Kit CCS120/120D, maintenance set

      Content: Electrolyte 50 ml/ 1.69 fl.oz. 2x membrane cap

    • Kataloška koda 71412916

      Kit CCS120/120D, Electrolyte 50 ml

      Content: Electrolyte 50 ml/ 1.69 fl.oz.

    • Kataloška koda 51517204

      Connection cable,CCS120,CCE-station, 1m

    • Kataloška koda 71105209

      Viton ring set for CCS120/120D

      2 pieces, replacement for silicone ring

    • Kataloška koda 50003987

      Junction box VBM

      with 10 high-impedance terminals Protection class: IP65 Dimensions: 125 x 80 x 55 mm (L x W x H)

    • Kataloška koda 71257946

      photometer M+N PF-3, desinf. (chlorine)

      colorimetric measurement of free and total chlorine 0,05 .. 6mg/l Disinfection, drinking and process water hand held photometer, IP67-graded, with cuvettes, DPD, according to ISO 7393 deliverey in plastic case, test kit for free and total chlorine included ::hand held photometer for field cal. and verification of desinfection loops