Cleanfit CPA473 - Retractable holder for fibrous and sticky media

Manual or automatic retractable assembly Cleanfit CPA473

Assembly with ball valve for the chemical, paper, and wastewater industries

CPA473

Primerjava

Lastnosti na dlani

Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder:
up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)

Vse specifikacije

Področje uporabe

The Cleanfit CPA473 retractable assembly is designed for application in fibrous or sticky media. Its patented sleeve seals and integrated scrapers make sure that nothing sticks to the sensor. Cleanfit offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.

Cleanfit CPA473 is intended for use in tanks and pipes in:

Chemical industry
Paper industry
Wastewater / industrial water
Power plants
Refuse incinerators

It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).

Prednosti

Safe and reliable separation from the process by ball valve, even under harsh conditions
No process interruption for electrode cleaning and calibration – saves maintenance time and costs
Extended operating life of electrodes due to automatic cleaning
Suitable for application in sticky and fibrous media thanks to integrated scraper and sleeve seals
Flexible adaptation to all applications by great variety of materials and process connections

Predhodnik

Cleanfit P CPA477

CPA463

Zgodbe o uspehu

Automated pH measuring point in wastewater

The Dow plant in Stade relies on Endress+Hauser solutions for pH monitoring in the treatment of production wastewater.
Preberi celotno zgodbo
Water/steam circuit at GETEC PARK.SWISS

GETEC SWISS.PARK improves plant efficiency and decreases downtimes thanks to Endress+Hauser SWAS System
Preberi celotno zgodbo
Measurable and testable: Monitoring with Teqwave

Efficient component cleaning is an important part of the production of industrially manufactured components. Borer Chemie AG therefore relies on the concentration measurement with Teqwave F, I and T.
Preberi celotno zgodbo
Liquid analysis in LNG trains

The various process steps in a gas liquefaction plant must comply with different limit values. Our products are ideally suited for these processes.
Preberi celotno zgodbo
Improved thickener operation at Minera Valle Central

The measurement of interface in thickeners is done manually, while the turbidity measurement is done by obtaining samples sent to the laboratory. With Endress+Hauser there is an automated solution.
Preberi celotno zgodbo

Enostavni produkti
Lahka izbira, vgradnja in uporaba

Tehnična odličnost

Preprostost

Kaj je FLEX?

Standardni produkti
Zanesljivi, robustni, nezahtevni za vzdrževanje

Tehnična odličnost

Preprostost

Kaj je FLEX?

Vrhunski produkti
Visoko funkcionalni in praktični

Tehnična odličnost

Preprostost

Kaj je FLEX?

Specialni produkti
Zasnovani za posebej zahtevne aplikacije

Tehnična odličnost

Preprostost

Spremenljivo

Kaj je FLEX?

FLEX izbira	Tehnična odličnost	Preprostost
F L E X Segment Fundamental Zadostite svojim osnovnim merilnim potrebam	Tehnična odličnost	Preprostost
F L E X Segment Lean Obvladajte ključne procese na preprost način	Tehnična odličnost	Preprostost
F L E X Segment Extended Optimirajte procese z inovativnimi tehnologijami	Tehnična odličnost	Preprostost
F L E X Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije	Tehnična odličnost	Preprostost Spremenljivo

Spoznajte FLEX podrobneje

Morda vas zanima tudi

O nas
No assembly, no measurement!

The safety and operating comfort of an analytical measuring point starts with using the right assembly. Our flexible assembly production ensures that you get the right assembly for your needs.
Več informacij

Merilni princip

Potentiometric
Application

Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry
Installation

Retractable assembly with ball valve
Characteristic

Open and closed tank, piping (min DN80)
Design

Manual or pneumatical
Manual or pneumatical ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G 1/4" or NPT 1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: stainless steel 1.4404
Ball valve: Stainless steel 1.4401, PTFE
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF, Stainless steel 1.4404
Rinse connection socket: Stainless steel 1.4404
Dimension

Immersion depth: 61 to 235mm
(2.4 inch to 9.25 inch)
Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder: up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)
Connection

G1¼ internal thread, DN50, DN65, ANSI 2"
Additional certifications

3.1. acc. to EN 10204

Merilni princip

Sensor ORP / Redox
Application

Chemical industry, paper industry, wastewater, industrial water, power plants, refuse incinerators, sugar industry
Installation

Retractable holder with ball valve
Characteristic

Open and closed tank, piping (min DN80)
Design

Manual or pneumatical
Manual or pneumatical ball valve
Can be fully automated with CPC30 / 300
Integrated rinse chamber with connection G 1/4" or NPT 1/4"
Material

Seals: EPDM / FPM / perfluoroelastomer
Electrode holder: stainless steel 1.4404
Ball valve: Stainless steel 1.4401, PTFE
Inlet safety seal: PVDF, PTFE, Viton®
Outlet safety seal: PVDF, Stainless steel 1.4404
Rinse connection socket: Stainless steel 1.4404
Dimension

Immersion depth: 61 to 235mm
(2.4 inch to 9.25 inch)
Process temperature

PA pressure cylinder (manually only):
Max. 80 °C (176 °F)
Stainless steel pressure cylinder:
up to 100°C (212 °F) with continuous operation up to 6 bar (87 psi)
Process pressure

PA pressure cylinder: Max. 6 bar (87 psi)
Stainless steel pressure cylinder: Max. 10 bar (145 psi)
Pneumatic outlet safety seal:
6 bar at 100 °C (87 psi at 212 °F)
Connection

G1¼ internal thread, DN50, DN65, ANSI 2"
Additional certifications

3.1.B EN 10204

Cenimo vašo zasebnost

Uporabljamo piškotke, da bi lahko izboljšali vašo izkušnjo med brskanjem, zbirali statistične podatke za izboljšanje delovanja spletnega mesta in zagotavljali prilagojene oglase ali vsebine.

Z izbiro "Sprejmi vse" se strinjate z našo uporabo piškotkov.
Za podrobnosti si oglejte naš Pravilnik o piškotkih .

	EN	SL
01/11/2009
01/02/2005
01/09/2003
01/10/2002

Jezik:	angleščina
Verzija:	01/11/2009
Velikost datoteke:	961.3 KB
Ime datoteke:	TI344CEN_1109.pdf

	EN	SL
22/07/2015
01/07/2006

Jezik:	angleščina
Verzija:	22/07/2015
Velikost datoteke:	2 MB
Ime datoteke:	TI00404CEN_1315.pdf

	EN	SL
01/11/2009
01/05/2005
01/02/2005
01/01/2004
01/08/2003

Jezik:	japonščina
Verzija:	08/02/2024
Velikost datoteke:	5.8 MB
Ime datoteke:	pH selection guide_CP00010C.pdf

Jezik:	nemščina
Verzija:	01/12/2021
Velikost datoteke:	3.3 MB
Ime datoteke:	CP00010CDE_1621_pH Auswahlhilfe_2021.pdf

Jezik:	French
Verzija:	13/02/2020
Velikost datoteke:	697.5 KB
Ime datoteke:	CS01628NFR-0120.pdf

	EN	SL
01/07/2003

	EN	SL
23/09/2020

Jezik:	angleščina
Verzija:	23/09/2020
Velikost datoteke:	209.2 KB
Ime datoteke:	Klassifizierungsbescheinigung nach DGRL für CPA473.pdf

	EN	SL
14/08/2020

Manual or automatic retractable assembly Cleanfit CPA473

Assembly with ball valve for the chemical, paper, and wastewater industries

Lastnosti na dlani

Process temperature

Process pressure

Področje uporabe

Prednosti

Predhodnik

Zgodbe o uspehu

Automated pH measuring point in wastewater

Water/steam circuit at GETEC PARK.SWISS

Measurable and testable: Monitoring with Teqwave

Liquid analysis in LNG trains

Improved thickener operation at Minera Valle Central

Morda vas zanima tudi

No assembly, no measurement!

Merilni princip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Merilni princip

Application

Installation

Characteristic

Design

Material

Dimension

Process temperature

Process pressure

Connection

Additional certifications

Back

Technical Information Retractable assembly Cleanfit P CPA473

Technical Information Topcal S CPC310

Operating Instructions Cleanfit P CPA473

SD CleanFit Servicekits / Spare part kits

pH measurement in industrial processes

産業プロセスにおけるpH測定

pH-Messung in Industrieprozessen

pH measurement increases process safety

pH-Messung erhöht Prozesssicherheit

Comment la mesure du pH augmente la sécurité des process

Product family: CleanFit P

Product family: CleanFit P

Back

Manual Kits CPA473 2013

KIT CPA473 retractable pipe short versio

KIT CPA473 electr. guide long

KIT CPA473/474 cylinder PA short

KIT CPA473/474 cylinder PA long

KIT CPA471 long+474 short: Cylinder SS

KIT CPA473/474 cylinder 1.4404 long

Kit CPA473 rinsing chamber

Kit CPA47: intermediate flange ball valv

KIT CPA473/474: Rinse nozzle G1/8-G1/4

KIT CPA473/474: Rinse nozzle G1/8-NPT1/4

Kit CPA473 ball valve

Kit CPA473 pneumatic drive complete

Kit CPA473 drive cpl. pneum. / electr.

Kit CPA47x:2pneum.prox.switch ball valve

Kit CPA473, KCI pipe pneumatic

Kit CPA473 KCl-pipe manual

KIT CPA471/472 shaft pneum long

KIT CPA471/472 lift tube gel hand long

KIT CPA473/474 pneum. re.pipe gel 360mm

KIT CPA473/474 manual, re.pipe gel 360mm

KIT CPA47x:stop bolt with handle (1 pc.)

CPA471...5 all seals w/o medium contact

KIT CPA47x pneu.connection G1/8 AD6 10p

CPA473 Seals w.media contact EPDM >10/07

CPA473 Seals w. media contact FPM >10/07

CPA473 Seals w.media contact KALRE>10/07

CPA473 EPDM: Scrapers f.ball valve>10/07

Cleaning and calibration system
Liquiline Control CDC90

Cleaning and calibration system
Liquiline Control CDC90