Področje uporabe
The HAW562 surge arrester is used to protect electronic components from being destroyed by overvoltage. It ensures that overvoltage surges which occur in signal cables (e.g. 4 to 20 mA), in communication lines (fieldbuses) and in power lines are safely passed into the ground. The functionality of the transmitter or the electronics component to be protected is not affected.
Surge arresters are used to weaken residual currents from upstream lightning protection steps and to limit system-induced or -generated overvoltage surges.
HAW562 units are primarily used in process automation and in measuring and communication technology within the chemicals, pharmaceuticals, water and wastewater sectors as well as in the food industry.
Prednosti
Investment intensive measuring instruments protected
Increased plant availability as surge arrester is perfectly matched to the electronic components involved in process automation and process measuring technology
Application in Ex areas - optionally available with SIL2 intrinsically safe approvals
Vibration and shock tested according to EN 60068-2
Direct and indirect shield grounding
Segment Fundamental
-
Enostavni produkti
- Lahka izbira, vgradnja in uporaba
Tehnična odličnost
Preprostost

-
Standardni produkti
- Zanesljivi, robustni, nezahtevni za vzdrževanje
Tehnična odličnost
Preprostost
-
Specialni produkti
- Zasnovani za posebej zahtevne aplikacije
Tehnična odličnost
Preprostost
Spremenljivo
FLEX izbira | Tehnična odličnost | Preprostost |
---|---|---|
Segment Fundamental Zadostite svojim osnovnim merilnim potrebam |
Tehnična odličnost
|
Preprostost
|
Segment Lean Obvladajte ključne procese na preprost način |
Tehnična odličnost
|
Preprostost
|
Segment Extended Optimirajte procese z inovativnimi tehnologijami |
Tehnična odličnost
|
Preprostost
|
Segment Xpert Imejte pod nadzorom najzahtevnejše aplikacije |
Tehnična odličnost
|
Preprostost
Spremenljivo |
-
Merilni princip
Surge arrester
-
Function
Surge arrester for DIN rail mounting
Compact device for an easy ordering (no separation of mounting module and protection module)
Flexible integration into the measuring chains of the process industry due to approvals according to ATEX & IEC, SIL2 conformity
compatibility with the established fieldbusses (HART, FF, PA)
Innovative grounding concept to avoid low-frequency equalizing currents – direct and indirect shield grounding possible in one device
Uninterruptible operation of the plant due to an automatic resetting after the discharge process -
Certification
SIL2 conformity
CSA -
Dimensions (wxhxd)
HAW562-AAA, HAW562-AAD, HAW562-AAE, HAW562-8DA:
12 x 90 x 72.5 mm
(0.47" x 3.54" x 2.85")
HAW562-AAB, HAW562-AAC:
18 x 90 x 73 mm
(0.71" x 3.54" x 2.87") -
Operating Voltage
24V/60V/230V/5V/12(80)V/24V
-
Merilni princip
Surge arrester
-
Measuring principle
Surge arrester for DIN rail mounting
-
Function
Surge arresters are applied to protect electronic components of a plant against overvoltage! Due to this investment intensive measuring instruments are protected and the plant availability is increased.
-
Application
Surge protection for power supply or signal / communication cables
-
SIL
2
-
Certificates
ATEX
IECEx
CSA
Za prenos CAD risb tega izdelka, ga konfigurirajte
Izberite med predlaganimi možnostmi
-
-- selected coding-- selected label99.999,00<%label%>
-
Želite več možnosti? Uporabite individualni konfigurator za nadaljevanje.
-
-- selected coding-- selected label99.999,00<%feature%>
-
<%label%>99.999,00
-
Želite več možnosti? Uporabite individualni konfigurator za nadaljevanje.
-
Process Connection
-
<%label%>99.999,00
-
<%label%>99.999,00
-
-
<%feature%><%coding%><%label%>
-
Cena za kos
-
<%range%><%price%>
-
- Izbirni dodatki
Individualna konfiguracija
Pogosto kupljeno skupaj
Dodatna oprema
Sorodni izdelki